云南惠博桥架设备有限公司欢迎您!
  1. 首页
  2. 新闻中心
  3. 行业资讯
  4. 内容

云南梯式桥架和云南槽式桥架的区别

作者:创始人 日期:2022-04-08 人气:54

云南梯式桥架和云南槽式桥架的区别
云南槽式桥架是桥架行业最常用的型号,全密封,如盒子般形状,防尘,抗干扰能力非常强,高防护承载着线缆不易受到严重腐蚀损伤,常用于各大建筑行业,结构简单,防护性能强,荷载能力好,所以是桥架行业最热门的型号,一般用于敷设数据控制电缆、通讯信号电缆等等。
云南梯式桥架外形独特,像梯子形状,不过它的承载能力比槽式、托盘式桥架都要强,因为它中间焊接横杆加固,线缆敷设在主干线上,独特的外形使得它重量变轻,散热透气性能好,方便与施工人员更好的安装,而且安全性也非常高,当线路出现损坏导致故障,维护人员也能清楚找出问题线路采用相应的安全措施,让该产品成为桥架行业的新焦点,常用于敷设直径较大的电缆,高低压动力电缆、电力电缆等等。
桥架厂家总结:槽式桥架和梯式桥架各有各优势,针对不同环境设计,更好的去敷设每一条线缆,当线缆不多的情况下,也可以将不同等级线缆敷设在同一条桥架上,联系生产厂家将桥架中间加隔板,用隔板对不同等级的线缆进行区分隔离,降低成本,各自运转。如果遇到高腐蚀、防火要求高的施工环境,可以对桥架做出相应的措施,通常桥架是用冷轧板制造而成,进行表面处理;热镀锌(热浸锌)、防火烤漆、电镀锌、静电喷塑、针对性的防护或者采用更好的原板材制造:不锈钢、铝合金、玻璃钢。

Yunnan ladder bridge and yunnan trough bridge difference

Groove bridge is a bridge in yunnan industry the most commonly used models, fully sealed, like the box shape, dustproof, strong anti-jamming capability, high protective carrying cable less susceptible to serious corrosion damage, often used in the construction industry, simple structure, protective performance is strong, good load capacity, so is the most popular model bridge industry, Generally used for laying data control cables, communication signal cables and so on.

Yunnan ladder type bridge appearance is unique, like a ladder shape, but its bearing capacity is stronger than the groove type, tray type bridge, because it is the middle welding bar reinforcement, laying cable in the trunk, unique appearance makes it lighter in weight, heat dissipation good ventilation performance, convenient and better installation and construction personnel, and security is also very high, when there is damage to the circuit leads to failure, Maintenance personnel can also clearly find out the problem line using the corresponding safety measures, so that the product has become the new focus of the bridge industry, often used for laying large diameter cables, high and low voltage power cables, power cables and so on.

Bridge manufacturer

Conclusion: groove bridge and ladder type bridge each have each advantage, according to different environment design, better to each cable laying, when the cable is not much, can also be different grade laying cable rack at the same bridge, contact the manufacturer will bridge with partition, with partition to distinguish between different levels of cable isolation, reduce cost and their operation. If the construction environment with high corrosion and high fire protection requirements is encountered, corresponding measures can be taken for the bridge. Usually, the bridge is made of cold rolled sheet, and the surface treatment is carried out. Hot dip galvanized (hot dip zinc), fire paint, electric galvanized, electrostatic spraying, targeted protection or use better original plate manufacturing: stainless steel, aluminum alloy, glass fiber reinforced plastic.



你觉得这篇文章怎么样?

00

相关内容